Lecture 15: Water production using RO/NF membrane (cost and capacity)

Membrane Technology for Water and Wastewater Treatment

Section 1: Membrane basic principles and selection process

Lecture 1: Course introducing, content and references (8:12)
Lecture 2: Introduction to membrane process (18:35)
Lecture 3: Determination of the necessary molecular separation size of the membrane (23:55)
Lecture 4: Determination of the membrane material (24:39)
Lecture 5: Decision on the module type (20:02)
Lecture 6: Decision of the process (10:18)

Section 2: Fouling, Scaling, Concentration Polarization, and solutions

Lecture 7: Fouling and scaling (types, factors, analysis) (24:04)
Lecture 8: Concentration polarization and resistances, fouling/scaling minimization methods. (13:26)

Section 3: Pretreatment and post-treatment

Lecture 9: Types of pretreatment, Control of critical substances/parameters (31:33)
Lecture 10: Post-treatment for membrane processes, Exercise (pretreatment process selection for groundwater, surface water, and seawater) (16:22)

Section 4: Membrane design and evaluation (RO/NF design in 10 steps)

Section 5: Water production using RO/NF membrane (cost and capacity)

Section 6: Case study: Drinking water treatment using Nanofiltration (NF)

Section 7: ROSA software tutorial and Reverse Osmosis (RO) process design using this software

Lecture 17: ROSA software tutorial, guidelines and standards (32:51)
Lecture 18: Designing a RO system for brackish surface water using ROSA software (22:29)
Lecture 19: Designing a RO system for seawater desalination using ROSA software (23:26)

Section 8: Introducing top membrane manufacturers and productions

Lecture 20: Introducing top membrane manufacturers and productions (This lecture will be uploaded on 12.08.2020)

Lesson content locked

If you're already enrolled, you'll need to login.